The hydraulic hose body is hydraulically formed, with good flexibility, good flexibility, strong bending and seismic capacity, bending resistance, tensile resistance, lateral pressure resistance and so on. The hydraulic hose has good wear resistance, can prevent rat bite, and can protect the internal wires from damage. There are many types of high-pressure water cleaning joints. Appropriate joints should be selected, and the joint sleeve design should be standard and reasonable. Sharp grooves and irregular dimensions will break the steel wire reinforcement layer. When crimping the joint, the amount of crimping shall be determined according to the inner diameter and outer diameter of the hose. The hydraulic hose is equipped with many joints, which is easy to connect with other equipment. Both ends of the hose can also be made into other connection methods other than threads, also known as flanges, flanges or flanges, which is convenient to connect and use with other equipment. The hydraulic hose is easy to thread, install and locate, which is not only suitable for matching with the rotary joint, but also widely used in the soft connection of the transportation of a variety of fluid media (decisive substances).
